Technical characteristics

Flow sensor

PNEUMOTACHOGRAPH Fleisch type, thermostatically controlled,
Flow range: From 0 to 2 litres/second.

Accuracy of measurements : Volumes: ± 2 %, Breath hold times : ± 0.01 s.

Stored measurements: Volumetric amplitudes, Breath hold times, Acceptable volumetric deviations, Thickness of tracing, Colours

Nominal heating temperature: 32°C ± 1°C,

Heating component: Water-tight on immersion in a cold decontamination product,

Mechanical characteristics

Box: Length: 200mm, Depth: 280mm, Height: 80mm.
Semi rigid flexible & sensor: Length: 750 mm.
Total weight of the box + sensor system: 7,7kg

Electrical characteristics

Sensor heating power supply
Input: 100-240V AC,
Consumption: 0.8 A,
Frequency: 50/60 Hz.

Electronic card power supplied by the PC
Input: USB 5V DC,
Consumption: 0.5 A.

Spirometer connection :
3-pin mains cable AC CEI 320-C14,
I/O by cable and USB 1.1 connector to the PC with 20-m USB/RJ45/USB extender

Computer minimum requirements

Pentium® IV or higher PC,
At least 512 Mo of RAM,
At least 8 Mo video card supported by Microsoft Direct X® 8.1,
At least 50 Mo free hard disk space,
2 USB 1.1 or USB 2.0 ports,
CD reader/engraver

Supported operating system

Compatible Windows XP (SP3) / Windows 7 (SP1).

The SDX® system Package is including